C615 H

DTH Drilling Series

Diameter : 4” (101.6mm) to 6” (152.4mm)

Single pass depth : 13.12 ft (4m)

Multi pass depth : 52.5 ft (16m)

Application :

Mining, Quarrying & Construction

The C615 Jack-less DTH Drilling Rig is designed to drill holes of 4 inch (101.6mm) to 6 inches (152.4mm) up to a maximum depth of 52.5 ft (16m). Built to drill in limestone quarries, aggregate mines and various construction applications.

The 500 CFM – 200 Psi (14.17 m3/min -13.8 bar) compressor develops the necessary bailing velocity for efficient clean down the hole drilling.

C620H

DTH Drilling Series

Diameter : 4-1/2” (114.3mm) to 6-1/2” (165.1mm)

Single pass depth : 19.68 ft (6m)

Multi pass depth : 118 ft (36m)

Application :

Mining, Quarrying & Construction

The C620H Jack-less Down the Hole Drill is designed to drill holes ranging from a diameter of 4-1/2 inch (114.3mm) to 6-1/2 inch (165.1mm) to a maximum depth of 118 ft (36m). The C620H is built for high efficiency and productivity to drill in medium to hard Limestone, Dolomite quarries and Aggregate mines. Robust yet compact design provides it with better manoeuvrability in tight corners and higher spacing – burden range.

C625H

DTH Drilling Series

Diameter : 4-1/2” (114.3mm) to 8” (203.2mm)

Single pass depth : 19.68 ft (6m)

Multi pass depth : 118 ft (36m)

Application :

Mining, Quarrying & Construction

The C625H Jack-less Down the hole drill is capable of drilling clean hole of the diameter of 4 1/2 -8 inch. The sturdy mast of the C625H delivers a single pass depth of 6 meters and a maximum depth of 30 meters.

The 900 CFM – 350 psi Compressor develops the necessary flushing velocity, improving drilling rate. Purpose-built for hard strata conditions the C625H, DTH drilling machine is the right choice for Metal, Limestone, Dolomite and Aggregate open cast quarries and mines.

C650 H

DTH Drilling Series

Diameter :6-1/2” (165.1mm) to 8” (203.2mm)

Application :

Mining, Quarrying & Construction

The REL C650H Down-the-Hole Blast Hole drill comes from the family of the C650 Series. Designed to drill clean holes of 6-1/2 inch (165mm) to 8 inch (203mm) diameter to a maximum depth of 175 ft (53.3m) using 25 ft (7.6m) long rods and 120 ft (36.5m) using 30 ft (9m) long rods.

Interested in our Products and Services?

Get in touch with us on a call or send us an email.

Get In Touch