REL Drilling Solutions

C625 D Jack less Down the hole drill

C625D - Down the Hole Drills
  • The C625 D Jack-less Down the Hole Drill is capable of drilling clean hole of the diameter of 4 ½(114 mm) to 6 ¾ (171 mm ). The sturdy mast of the C625 D delivers a single pass depth of 5m / 6m and a maximum depth of 30m / 24m.
  • The 900 CFM – 350 psi Compressor develops the necessary flushing velocity, improving drilling rate.
  • Purpose-built for hard strata conditions the C625 D, DTH drilling machine is the right choice for Metal, Limestone, Dolomite and Aggregate open cast quarries and mines.
  • The C625 D is optimized for higher productivity, with a reduced overall operating cost providing better returns.
  • The Horizontal and Vertical coverage along with angle hole and Horizontal drilling provides better pre-split and production drilling capabilities.
  • The Engine – Hydraulic bay is designed to with adequate space for easy serviceability.
  • The REL C625 D is available with three Autonomous Package
    • Basic One touch
    • Fully Autonomous
    • Remotely Operated Fully Autonomous Packages
SPECIFICATION Imperial Metric
Drilling Diameter 4 ½ to 6 ¾ 114 to 171 mm
Pipe Size 3-1/2 to 5 inch 89 to 127 mm
SP - Single Pass depth
Standard Mast 16 ft 4 inch 5 m
Long Mast 19 ft 8 inch 6 m
MP - Multi Pass depth
Standard Mast 98.4 ft 30 m
Long Mast 78.7 ft 24 m
Compressor 900 cfm – 350 psi 25.5 m3/min -24.1 bar
Pull Down Capacity 9000 lbs 4083 Kg
Pull Up Capacity 11000 lbs 4990 Kg
Feed Rate Rapid 196 ft/min 59.8 m/min
Rotary Torque 46024 inch.lbs 5200 Nm
Rotary Speed 0 to 70 rpm
Engine 540 HP 403 kW
Undercarriage Triple Grouser with 450mm width & sufficient rollers
Ground Bearing pressure 14.5 psi 100 kPa
Speed in slope / Plain 0.9 / 1.86 mph 1.5 / 3.0 km/hr

PARTS & SERVICES

Parts Services View More

SIMILAR PRODUCTS

C650 Down the Hole Drills View More

Interested in our Products and Services?

Get in touch with us on a call or send us an email.

Send EnquiryDealer Enquiry